|
|
|
IBSW-IB |
|
| |
|
Intel® Celeron N3160 Quad Core / N3060 Dual Core Mini-ITX |
|
|
|
| |
|
|
|
- Lower total cost of ownership with DC12V support and onboard TPM2.0 (optional) & Amplifier (optional)
- Supports 1 PCIe x1, 1 M.2 (key-B), 1 Mini-PCIe expansion slot, 6 COMs, 4 USB 3.0 & 2 USB 2.0, dual LAN
- Supports VGA, HDMI, LVDS
- One 204-pin SO-DIMM up to 8 GB DDR3L 1600 MHz SDRAM
- Supports Intel Celeron processor N3160 or N3060
|
|
|
|
|
|
|
|
| |
System |
| CPU |
Intel® Braswell N3060 or N3160 |
| BIOS |
AMI 64Mb SPI |
| System Chipset |
SoC |
| I/O Chip |
Nuvoton NCT6106D |
| Memory Type |
One 204-pin SODIMM up to 8GB DDR3L 1600 MHz |
| Watchdog Timer |
Reset : 1 to 255 sec/min per step |
| Expansion |
1 Mini-PCIe, 1 PCIe x1 |
| Power Status |
S0, S3, S4, S5 |
| Smart Fan Control |
Yes |
I/O |
| MIO |
1 LVDS, 2 USB2.0, 1 M.2, 3 RS-232, 1 RS-232 with 5V/12V Power, 2 SATA3, 2 Fan, 1 LPT, 1 LPC, 1 8-bit GPIO |
| USB |
4 USB3.0(rear), 1 USB2.0 Header(internal) |
| GPIO |
8-bit General Purpose I/O |
Display |
| HDMI |
Onboard, up to 3440 x 1440 |
| VGA |
Onboard, up to WUXGA 1920 x 1200 (@60Hz) |
| LVDS |
Onboard, up to QXGA 2048 x 1536 (@49.95HZ) |
Audio |
| Audio Codec |
Realtek ALC892, 5.1 Channel HD Audio |
| Audio Interface |
Line-out, Mic-in, Front Audio Header |
| Audio Amplifier (W) |
2W, TI TPA2012 (Optional) |
Ethernet |
| LAN 1 |
Realtek RTL8111G Gigabit LAN |
| LAN 2 |
Realtek RTL8111G Gigabit LAN |
Back Panel I/O Port |
| VGA Port |
1 |
| HDMI Port |
1 |
| USB 3.0 Port |
4 |
| Audio I/O (2 Jacks) |
1 |
| DC-in Jack |
1 |
| LAN RJ45 Port |
2 |
| COM RS-232 (Wake-On-Ring) |
2 |
| PS/2 Keyboard/ Mouse Port |
1 |
Internal I/O Connector |
| COM RS-232 Connector (1 with 5V/12V power) |
4 |
| SATA 3.0 Connector |
2 |
| SATA Power Connector |
1 |
| Front Panel Connector |
1 |
| Front Audio Connector |
1 |
| CPU Fan Connector |
1 |
| System Fan Connector |
1 |
| USB 2.0 Header |
1 |
| M.2 |
1 |
| Mini PCI-E Connector |
1 |
| LVDS Connector |
1 |
| LVDS Backlight Connector |
1 |
| AMP Connector |
1 |
| GPIO Connector |
1 |
Power |
| Power Requirement |
+12V (1.07A), +5V (1.66A), +3.3V (0.47A), -12V (0.05A), 5VSB (0.16A) |
| Power Type |
12V DC-in |
| Power Connector |
1 DC-in Jack, 1 4-pin ATX 12V Power Connector |
Mechanical & Environmental |
| Operating Temperature |
0°C to 60°C (32°F to 140°F) |
| Operating Humidity |
95%@40°C (non-condensing), operating |
| Size (L x W) |
6.69" x 6.69" (170 mm x 170 mm) |
| Weight |
0.79 lbs (0.36 Kg) |
|
|
|
|
|
|
/IBSW-IB_Front_small20170327154853.jpg)
/IBSW-IB_IO_small20170327154902.jpg)
/IBSW-IB_3D_small20170327154815.jpg)